3M 7100148769 | Scotch-Weld Pneumatic Applicator

3M Scotch-Weld Dual Drive Pneumatic Applicators are used to dispense two-component 3M Scotch-Weld Structural Adhesives packaged in Duo-Pak (DP) cartridges.

3M Scotch-Weld Dual Drive pneumatic applicators make dispensing two-component 3M Scotch-Weld Structural Adhesives clean and easy with minimal waste. Air pressure drives the dual pistons directly into the Duo-Pak (DP) cartridge, applying equal pressure and feeding the two components of the adhesive directly into the mixing nozzle (sold separately).

These pneumatic dispensers offer highly precise dosing with precision drip-free dispensing, while the pistol grip provides comfortable handling and precise control. They immediately reach maximum pressure with no power lag, an integrated regulator enables fine-tuning of the flow rate. A built-in silencer enables quiet operation, the air input has an integrated PTFE seal for quick release.

Conversion kits allow 1:1, 2:1, 4:1 and 10:1 cartridges to be used in the same dispenser while offering comfort and control. A dual-drive mechanism provides synchronized movement of plunger rods to balance the force applied to each cartridge. Universal trays will also fit the manual dispensers, while controls are easily accessible by both right- and left-handed users.

NOTE: These dual drive applicators have no safety interlock pin, so pulling the trigger will activate the drive mechanism even if there is no cartridge in place. It is also important to be sure the cartridge is firmly seated at the base of the dispenser tray so that the plunger rods properly align through the cartridge to dispense. Please review the full user instructions and follow all safety warnings and hazards as indicated.

• 3M Scotch-Weld Dual Drive Pneumatic 1:1/2:1 Applicator 200ml for 200ml cartridges
• 3M Scotch-Weld Dual Drive Pneumatic 1:1/2:1 Applicator 400ml for 400ml cartridges
• 3M Scotch-Weld Dual Drive Pneumatic 10:1 Applicator 490ml for 490ml cartridges

• Panel to frame/stiffener to panel
• Small joint assembly
• Mounting and trim attachment
• Sealing, potting and encapsulating
• Large surface lamination
• Applications where precision mixing is required

3M Scotch-Weld Pneumatic Applicators ensure accurate measurement, thorough mixing and precise placement of material. Other advantages include improved mixing ratio accuracy with no hand mixing required and efficient use of adhesive.

Choose original 3M Scotch-Weld EPX Mixing Nozzles to ensure the accurate performance of 3M Scotch-Weld Dual Drive Applicators for the ideal system for assembly, maintenance and in-field service.

Features:

• Dispenses two-component 3M scotch-weld structural adhesives
• Pneumatically powered systems are ideal for large volume dispensing and higher throughput
• Ensures correct mix ratio during dispensing, no need to weigh components
• Minimizes waste and mess associated with hand mixing
• Pistol grip provides comfortable handling and precise control
• Applicator provides a continuous and consistent sized bead of adhesive

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov