3M 7100184498 | Secure Click D701 9.00mm Width x 18.00mm OAL Filter Retainer

The 3M Secure click Filter Retainer D701 is used to hold 3M Secure click Particulate Filters D7N11 or D7P71 in place on 3M Secure click Cartridges D8000 Series. For use with 3M Secure click Respirators. The 3M Secure Click Filter Retainer D701 is used to hold 3M Secure Click Particulate Filters D7N11 or D7P71 in place on 3M Secure Click Cartridges D8000 Series. For use with 3M Secure Click Respirators. When certain airborne particulates are present in the work environment in addition to certain vapors or acid gases, a particulate filter may be required. The 3M Filter Retainer D701 allows you to use NIOSH-approved N95 or P95 filters with 3M Secure Click Cartridges D8000 Series.

Change 3M respirator filters in accordance with they-documented change-out schedule or anytime the filters are dirty, damaged, or difficult to breathe through. Before use, they are must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630.

Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as they as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult the on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• Designed for use with 3M secure click half face piece reusable respirator HF-800 Series which offers better breathability, unique filter/cartridge connection, and push button seal check
• Retainer allows you to use NIOSH-Approved 3M Secure Click Particulate Filters N95 D7N11 and P95 D7P71 and works with D8000 Series Cartridges (use one retainer per cartridge)
• Quick, Simple Connection: D8000 Series cartridges/filters snap connection helps provide confidence that filters/cartridges are installed properly. Simply align the connections and push until you hear a click
• COST SAVINGS: Allows for replacement of filters prior to change out of cartridges
• Bayonet Style Conversion: This Secure Click Retainer does the job of bayonet style 3M Filter Retainer 501
• For workplace/occupational use only

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov