The 3M 7100232751 is a robust cubitron 984F II ceramic belt built for heavy stock removal across large-format metalworking tasks. With an overall length of 180.0" and a working width of 12.0", this belt reduces downtime by covering more surface per run. Compared to a 36 grit sanding disc, its 36+ grit precision-shaped ceramic formulation allows for aggressive cutting while preserving part geometry. A backing made of YF polyester cloth provides the belt with dimensional stability and excellent tracking on wide belt sanders and bench motors. Closed-coat construction concentrates abrasive action, resulting in repeatable removal rates and consistent finishes across long production cycles. Film-Lok splice technology creates a low-profile, high-strength joint that can withstand continuous, high-speed operations. The 3M 984F single-flex design enables it to follow platen contours for edge work, weld removal, and rapid material shaping. This 3M Cubitron 984F II ceramic belt is made to run cooler and cut faster, reducing downtime and abrasive consumption overall. Perfect for removing primary stock from heavy steel fabrications, castings, and thick-section alloys before finer finishing passes. When you need a high-capacity, aggressive 36+ grit solution that combines speed, durability, and predictability, choose 3M 7100232751.
Massive 180" × 12" Format
The large 180.0" OAL and 12.0" width let you abrade more area per pass, accelerating throughput on heavy fabrication work with the 3M 7100232751.
Precision-Shaped 36+ Ceramic Grains
Precision-shaped ceramic abrasives provide fast stock removal and controlled edge geometry compared with a typical 36 grit sanding disc.
YF-Weight Polyester Cloth Backing
Durable YF backing stabilizes the belt under tension for reliable tracking on wide belt sanders and high-torque bench motors.
Film-Lok Splice for Continuous Use
The Film-Lok splice creates a seamless, high-strength joint that reduces seam failures during uninterrupted production runs.
Closed-Coat Construction for Predictability
Closed-coat abrasive loading concentrates cutting action to maintain consistent removal rates and extend belt life in heavy grinding tasks.
| Manufacturer Part Number | 7100232751 |
| Overall Length (Inch) | 180.0" |
| Overall Length (mm) | 4572.0mm |
| Overall Width (Inch) | 12.0" |
| Overall Width (mm) | 304.8mm |
| Abrasive Material | Precision Shaped Ceramic |
| Backing Material | Polyester Cloth |
| Backing Weight | YF Weight |
| Coat Type | Closed Coat |
| Color Family | Red |
| Flex Type | Single-Flex |
| Grit | 36+ |
| Splice Type | Film-Lok |
| Product Form | Belt |
| Product Number | 984F |
What types of work is 3M 7100232751 best for?
This 3M 7100232751 belt excels at primary stock removal, weld removal, shaping and heavy surface prep on steel and thick-section alloys.
How does the 3M 984f ii ceramic belt compare to a 36 grit grinding disc?
The Cubitron 984F belt produces faster removal with less heat buildup and more consistent contact across wide surfaces than many 36 grit grinding discs.
Can I use the 3M 984F on automated wide belt systems?
Yes, the large format, YF-weight backing and Film-Lok splice make it suitable for continuous wide belt sander systems and heavy bench motors.
Will this belt run wet or dry and resist glazing?
The closed-coat 36+ ceramic formulation resists glazing and performs well in both wet and dry processes, helping maintain cut rate.
What is 36 grit sandpaper used for?
The 36-grit sandpaper is used for very aggressive material removal, rapid shaping, weld and scale removal, and initial stock prep before finer grits.
714.897.1700
Chat
Email
Quotes
Quick Order
