714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Features
- Large screen (128x64 dot matrix LCD), allows for clear display of all functions and parameters
- Hardness test can be taken at any angle including inverted
- A wide measuring range supports the hardness of all metallic materials. Hardness results are directly displayed in HRB, HHRC, HV, HB, HS, HL hardness scales
- Large capacity memory storage of 500 sub groups. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale
- Upper and lower limit can be preset. An audio alarm will automatically sound when the reading is outside of the preset limits
- Battery voltage information is displayed including the charge status
- USB1.1 port allows for information to be uploaded directly to a PC
- High speed thermal printer allows for the readings to be immediately printed
- 6V Ni-MH rechargeable battery are supplied. The batteries can be charged with the integrated charger. Up to 150 hours of continuous operation battery life between charges. (eL off and no printing)
- Automatic power off after five minutes
- Range: (170-860)HLD, (17-68.5)HRC, (19-651)HB
- Accuracy: HLD: ±5, HRC: ±1, HB: ±4
- Diameter of carbide ball: 3mm
- Impact device
- Hardness test block
- Small support ring
- Cleaning brush
- Battery charger
- Paper for printing
- Manual
- DataPro software
- Communication cable
Product Specifications
| Manufacturer Part Number | 7640171 |
| Scale Type | Rockwell, VIckers, Brinell, Shore, Leeb |
| Minimum Hardness | 19 HB; 17 HRC; 170 HLD |
| Maximum Hardness | 651 HB; 68.5 HRC; 960 HLD |
| Display Type | LCD |
| Product Type | Bench Top Hardness Tester |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
