Serrated Adjustable Edge Clamps
These low-profile clamps are ideal for securely gripping the side of a workpiece to keep the top clear for machining, especially when a large clamping range is required to accommodate workpiece-size variations. The serrated jaw slides at a 45° angle to exert clamping force both forward and downward simultaneously. Clamp by turning the socket-head screw in the sliding jaw with a hex wrench. Choice of low-nose clamping jaw or high-nose clamping jaw. V-groove in nose is useful for clamping round parts or corners.The adjustable (slotted) edge clamps are useful for mounting directly on a machine table. The slot is tapered to prevent the clamp from backing off under heavy forces (use two mounting screws on longer clamps).
Application Information
Clamp by tightening the socket-head screw in the sliding jaw with a hex wrench.
Low-Nose Version
The low-nose version is ideal for thin parts and other applications where extra machining clearance is required.
Material
Item | Material | Heat Treat | Finish | DFARS | RoHS |
Body and Nose | 1018 Steel | Carburized Hardened | Black Oxide | Yes | Yes |
Clamping Screw | 4140 Steel | Heat Treated Rc 43-45 | Black Oxide | Yes | Yes |
Parts Specification
Mounting Screw Size | A | B | C | G | H | K | L | M | N | P | Q |
5/16-18 or M8 | 2-3/32 | 5/8 | 1 | 1/4 | 9/32 | 1/4 | 1-9/16 | 5/32 | 1/8 | 1/8 | 1-1/2 |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov