714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Locking L Pins
Similar to a standard L Pin, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing's spring clip snaps into the pin's radial groove. This holds the pin fully retracted by spring force and positively prevents removal. Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. Made in USA.The complete assemblies listed below include a Locking L Pin, Locking-Pin Bushing, and Lockscrew. Locking-Pin Bushings are designed to press fit in a standard reamed hole, and can be further secured with the included Lockscrew to positively hold the bushing in place.
Application Information
In fully retracted position, the bushing's spring clip holds the L Pin fully retracted by spring force and positively prevents removal. Spring pressure also holds the pin in intermediate extended positions.
Material
| Item | Material | Heat Treat | Finish |
| Pin | 1215 Steel | Carburized-hardened | Black Oxide |
| Handle | 1215 Steel | - | Black Oxide |
| Locking Bushing | 1144 Steel | Carburized-hardened | Black Oxide |
| Retainer Clip | Stainless Steel | - | N/A |
Parts Specification
| A Diameter Nominal (mm) | A Diameter Actual (mm) | B Pin Length (mm) | P Bushing Length Under Head | P (mm) | C Diameter (mm) | D (mm) | G (mm) | J (mm) | L (mm) | M (mm) | N Diameter Nominal (mm) | N Diameter Actual (mm) | R (mm) | S (mm) | L Pin (included) | Bushing (included) | Lockscrew (included) |
| 10mm | 9.975mm | 76mm | Standard | 12mm | 12.5mm | 63.5mm | 12mm | 9mm | 63.5mm | 5mm | 16mm | 16.043mm | 16mm | 22mm | CLM-10-LLP INCLUDED | CLM-10-LPB INCLUDED | LSM-3 INCLUDED |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
