Locking-Pin Bushings are equipped with a retainer spring clip on the inside diameter, for use with all types of locking/captive pins and locating screws. The threaded version has an externally threaded shank, for installation in a tapped hole. This threaded design provides less locational accuracy, but is handy when captive clamping pins are used in non-locating applications. This version has an oversize ID (.040" larger than nominal size) as standard. Made in USA.
Every Locking-Pin Bushing includes a spring clip, to retain its captive L Pin, T Pin, or Clamping Pin. To remove the pin from the bushing, the spring clip must first be removed.
| Item | Material | Heat Treat | Finish |
| Locking Bushing | 1215 Steel | Carburized-hardened | Black Oxide |
| Retainer Clip | Spring Steel | - | N/A |
| A Diameter Nominal (mm) | A Diameter Actual Oversize (mm) | B Thread | Thread Pitch (mm) | C (mm) | D Diameter (mm) | E (mm) | F (mm) |
| 10mm | 11mm | M18x1.5 | 1.5mm | 8.9mm | 22mm | 12mm | 20mm |
714.897.1700
Chat
Email
Quotes
Quick Order
