Carr Lane PM-15-12-8.40 | 15mm OD x 12mm Length Quick-Ship Head Press-Fit Bushing

Quick-Ship Press-Fit Bushings-Metric (PM)

Metric version of the popular P bushing. PM bushings are permanently pressed into the jig plate, usually flush with the top surface. They are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. PM bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.

Application Information

PM bushings are permanently pressed into the jig plate, usually flush with the top surface.

ID Tolerance

Standard ID Tolerance (G6):

Over 6 to 10mm +0.005/+0.014mm

OD Tolerance

Standard OD Tolerance (s6):

12 to 18mm +0.039/+0.028

Material

Material	Heat Treat	Finish	DFARS	RoHS
1144 Stressproof Steel	Heat treated to achieve Rc 62-64 ID hardness	-	-	Yes

Parts Specification

ID (mm)	OD (mm)	Length (mm)
8.40mm	15mm	12mm