Features
- The 3261 Tapered Mill is a 2-flute, general purpose end mill designed for use in titanium, super alloys, hardened steels, stainless steels, steels, cast iron, brass & copper, high si aluminum, and low si aluminum
- The 3261 Tapered Mill is stocked uncoated and with TiAlN coating
Product Specifications
Cutting Diameter (Decimal Inch) | 0.1250" |
Cutting Diameter (mm) | 3.18mm |
Cutting Diameter (Inch) | 1/8" |
Cutting Flute Length (Decimal Inch) | 0.3125" |
Cutting Flute Length (mm) | 7.94mm |
Cutting Flute Length (Inch) | 5/16" |
Shank Diameter (Decimal Inch) | 0.1250" |
Shank Diameter (mm) | 3.18mm |
Shank Diameter (Inch) | 1/8" |
Overall Length (Decimal Inch) | 1.5000" |
Overall Length (mm) | 38.10mm |
Overall Length (Inch) | 1-1/2" |
Coating/Finish | Uncoated |
Metric/Inch | Inch |
Center Line Taper | 7 |
Nose Diameter (Decimal Inch) | 0.0625" |
Nose Diameter (mm) | 1.59mm |
Nose Diameter (Inch) | 1/16" |
Nose Radius (Decimal Inch) | 0.0312" |
Nose Radius (mm) | 0.79mm |
Number of Flutes | 2 |
Flute Spiral Direction | Straight |
Direction of Cut | Right Hand |
Point End Type | Ball |
End Type Character Designation | B |
Point Include Angle | 14 |
End Type | Single End |
Coolant Through | Non Coolant Through |
Weldon Flat | No |
Length | Standard |
Length Designator | SD |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Fullerton Tool
Mill Diameter (Inch):
1/8"
Number of Flutes:
2
Length of Cut (Inch):
5/16"
Length of Cut (Decimal Inch):
0.3125"
Length of Cut (mm):
7.94mm
Shank Diameter (Inch):
1/8"
Shank Diameter (Decimal Inch):
0.1250"
Shank Diameter (mm):
3.18mm
Overall Length (Inch):
1-1/2"
Overall Length (Decimal Inch):
1.5000"
Overall Length (mm):
38.10mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Ships:
From Partner Facility