null

Fullerton Tool 36160 | 90-degree 1/8" x 1-1/2" Solid Carbide Uncoated Chamfer Mill

$19.86 $12.51
(You save $7.35)
Ships:
From Partner Facility
Brand:
Fullerton Tool
Cutter Head Diameter (Inch):
1/8"
Cutter Head Diameter (Decimal Inch):
0.1250"
Cutter Head Diameter (mm):
3.18mm
Included Angle:
90°
Material:
Solid Carbide
Finish/Coating:
Uncoated
Overall Length (Inch):
1-1/2"
Overall Length (mm):
38.10mm
Shank Diameter (Inch):
1/8"
Shank Diameter (Decimal Inch):
0.1250"
Number of Flutes:
2
End Type:
Single End
Ships:
From Partner Facility
SKU:
10002159
UPC:
Weight:
0.05 LBS
Shipping:
Calculated at Checkout

Features

  • The 3730 Chamfer Mill is a general performance end mill available with 2 or 4-flutes
  • It was designed for deburring and chamfering in small grooves and holes
  • It improves tool life and finish for profiling and chamfering of large features
  • The 3730 Chamfer Mill is stocked uncoated and with TiAlN coating

Product Specifications
Cutting Diameter (Decimal Inch) 0.1250"
Cutting Diameter (mm) 3.18mm
Cutting Diameter (Inch) 1/8"
Cutting Flute Length (Decimal Inch) 0.0625"
Cutting Flute Length (mm) 1.59mm
Cutting Flute Length (Inch) 1/16"
Shank Diameter (Decimal Inch) 0.1250"
Shank Diameter (mm) 3.18mm
Shank Diameter (Inch) 1/8"
Overall Length (Decimal Inch) 1.5000"
Overall Length (mm) 38.10mm
Overall Length (Inch) 1-1/2"
Non Cutting Tip (Decimal Inch) 0.0200"
Non Cutting Tip (mm) 0.51mm
Coating/Finish Uncoated
Metric/Inch Inch
Number of Flutes 2
Flute Spiral Direction Straight
Direction of Cut Right Hand
Point End Type Chamfer
End Type Character Designation C
Chamfer Angle (Degrees) 90
End Type Single End
Coolant Through Non Coolant Through
Weldon Flat No
Length Standard
Length Designator SD

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
Fullerton Tool
Cutter Head Diameter (Inch):
1/8"
Cutter Head Diameter (Decimal Inch):
0.1250"
Cutter Head Diameter (mm):
3.18mm
Included Angle:
90°
Material:
Solid Carbide
Finish/Coating:
Uncoated
Overall Length (Inch):
1-1/2"
Overall Length (mm):
38.10mm
Shank Diameter (Inch):
1/8"
Shank Diameter (Decimal Inch):
0.1250"
Number of Flutes:
2
End Type:
Single End
Ships:
From Partner Facility