Gar G-63 | 16 - 250 Microinches Rounded Surface Roughness Comparator Scale w/10 Finish Specimens

Ten replicated turn surface finish specimens: Five shown as inside diameter (I.D.) and five shown as outside diameter (O.D.)- both with a range of 16 to 250 Microinches.

The G-63 Microfinish Comparator Surface Roughness Scale is made by a dual electroforming process wherein nickel is electrodeposited to provide an exact reproduction in intricate detail. The surfaces used in this scale are reproductions of accurately turned surfaces measured in microinches (millionths of an inch- 0.000001"). The numbers engraved alongside each surface are the average deviation from the mean surface expressed in microinches. The G-63 Microfinish Comparator Surface Roughness Scale provides industry with established cylindrical roughness specimens for visual and tactual comparison. It is used in specifying and controlling surface roughness when a product having the appearance of typically turned surfaces is required. The G-63 Microfinish Comparator Surface Roughness Scale provides an economical tool which permits roughness to be specified on the same basis as linear measurements. The surfaces presented are the result of years of research and engineering.

Features:

• Roughness scale for inspection
• 10 Precision finish specimens
• Included are 5 rounded inside diameter and 5 outside diameter samples
• Range 16-250 Microinches
• Accuracy of a millionth of a inch 0.000001"
• Genuine leather sleeve

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov