Harvey Tool

Harvey Tool 990508-C3 | 120 Degree Point Angle 1/8" Shank x 0.0360" LOC x 1-1/2" OAL AlTiN Coated Solid Carbide Sharp Point Engraving Cutter

Harvey Tool

Harvey Tool 993215-C8 | 1/8" Diameter x 1/8" Shank x 0.2300" LOC x 2-1/2" OAL TiB2 Coated Solid Carbide Engraving Cutter Marking Cutter for Non-Ferrous Materials

Harvey Tool

Harvey Tool 993245-C8 | 1/8" Diameter x 1/8" Shank x 0.0620" LOC x 2" OAL TiB2 Coated Solid Carbide Engraving Cutter Marking Cutter for Non-Ferrous Materials

Harvey Tool

Harvey Tool 996712 | 3/16" Diameter x 3/16" Shank x 0.2440" LOC x 2" OAL Uncoated Solid Carbide Engraving Cutter Marking Cutter for Ferrous Materials

Micro 100

Micro 100 RSC-375-2 | 60 Degree Included Angle 3/8" Shank x 2-1/2" OAL Tipped Off Uncoated Carbide Single End Engraving Cutter

Micro 100

Micro 100 RTC-125-13 | 30 Degree Included Angle 1/8" Shank x 3" OAL Tipped Off Uncoated Carbide Single End Engraving Cutter

Emuge

Emuge 1710.06003 | 0.118" Diameter x 50.00mm OAL 60 Degree Point Angle 1 Flute Bright Coated Engraving Cutter

Emuge

Emuge 1710.06004 | 0.157" Diameter x 55.00mm OAL 60 Degree Point Angle 1 Flute Bright Coated Engraving Cutter

Emuge

Emuge 1710.06005 | 0.197" Diameter x 62.00mm OAL 60 Degree Point Angle 1 Flute Bright Coated Engraving Cutter

Emuge

Emuge 1710.06006 | 0.236" Diameter x 66.00mm OAL 60 Degree Point Angle 1 Flute Bright Coated Engraving Cutter

Emuge

Emuge 1710.06008 | 0.315" Diameter x 79.00mm OAL 60 Degree Point Angle 1 Flute Bright Coated Engraving Cutter

Emuge

Emuge 1710.09003 | 0.118" Diameter x 50.00mm OAL 90 Degree Point Angle 1 Flute Bright Coated Engraving Cutter