714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
- Unlike chucks and most collets that grip the OD of a workpiece, 5C expanding collets are designed to grip on the ID of a part
- Accu-length design ensures precise workpiece positioning – no z-axis movement
- Collet head is easily machined to required size. Can be re-machined as necessary
- Concentricities of ±0.0002"" can typically be achieved using Royal 5C expanding collets
- Made from 1/44 steel that can be hardened after machining for wear resistance
- Additional head lengths and diameters available. Advantages Royal step collets allow large diameter parts to be held in a 5C collet
- Head can be easily bored out by customer to required size
- Three dowel pins are supplied to ensure accurate machining
- 1 1/4"" thick head allows for 1"" bore depth
- Collets are made from 1/44 steel and can be hardened for wear resistance
Product Specifications
| Nominal Head Diameter (Inch) | 2"" |
| Pilot Hole Size (Inch) | 1/4"" |
| Pin Diameter (Inch) | 1/8"" |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
