714.897.1700
Chat
Email
Quotes
Quick Order
Product Specifications
| Manufacturer Part Number | 02452924 |
| Cutting Diameter (mm) | 2.00mm |
| Cutting Diameter 1 (mm) | 2.00mm |
| Connection Diameter Machine Side (mm) | 6.00mm |
| Shank Diameter (mm) | 6.00mm |
| Neck Diameter (mm) | 1.90mm |
| Minimum Helical Interpolation Hole Diameter (mm) | 2.60mm |
| Maximum Helical Interpolation Hole Diameter (mm) | 3.83mm |
| Cutting Edge Effective Length (mm) | 2.00mm |
| Neck Length (mm) | 4.00mm |
| Neck Length 1 (mm) | 4.00mm |
| Minimum Clamping Length (mm) | 36.00mm |
| Length Variant Cataloque | 2 |
| Theoretical Cutting Edge Length (mm) | 2.00mm |
| Overall Length (mm) | 50.00mm |
| Corner Chamfer Width (mm) | 0.08mm |
| Number of Flute | 3 |
| Pheripheral Cutting Edge Count | 3 |
| Maximum Depth of Cut (mm) | 2.00mm |
| Axial Runout (mm) | 0.01mm |
| Radial Runout (mm) | 0.01mm |
| Cutting Edge Count | 3 |
| Face Cutting Edge Count | 3 |
| Tool Cutting Edge Angle (Degree) | 90 Degree |
| Tool Cutting Edge Angle In Feed Direction End (Degree) | 92 Degree |
| Tool Cutting Edge Angle In Feed Direction Side (Degree) | 90 Degree |
| Corner Chamfer Angle (Degree) | 45 Degree |
| Collision Angle (Degree) | 14.5 Degree |
| Flute Helix Angle (Degree) | 50 Degree |
| Rake Radial Angle (Degree) | -12 Degree |
| Maximum Ramping Angle (Degree) | 1 Degree |
| Cutting Direction | Right Hand |
| Flute Helix Hand | Right Hand |
| Center Cutting Capability | Yes |
| Cutting Geometry Type | JHP170 |
| Cutting Geometry Type Technical | JHP170 |
| Internal Coolant Channel | No |
| Cutting Item Material Type | Carbide |
| Shank Type | Weldon |
| Material | Carbide |
| Coating | MEGA-64 |
| Product Type | Corner Chamfer End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Seco Tools
Mill Diameter (Inch):
5/64"
Mill Diameter (Decimal Inch):
0.0787"
Mill Diameter (mm):
2.00mm
Number of Flutes:
3
Shank Type:
Weldon
Material:
Carbide
Finish/Coating:
MEGA
Shank Diameter (Inch):
15/64"
Shank Diameter (Decimal Inch):
0.2400"
Shank Diameter (mm):
6.00mm
Overall Length (Inch):
50"
Overall Length (Decimal Inch):
1.9685"
Overall Length (mm):
50.00mm
Cutting Direction:
Right Hand
interval quantity:
1
