714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Features:
- Open end tooth design to facilitate a smooth and efficient chip evacuation when used in axial applications such as Plunging, Ramping, & Helical Interpolation
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design and Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- End teeth featuring a wiper flat to increase corner strength and significantly improve workpiece floor surface finish
- Optimized tool life and high metal removal rates through Kyocera proprietary PVD Ti-NAMITE-X (TX) coating
Product Specifications
| Manufacturer Part Number | 47823 |
| Cutting Diameter (Decimal Inch) | 0.472" |
| Cutting Diameter (mm) | 12.00mm |
| Shank Diameter (Decimal Inch) | 0.472" |
| Shank Diameter (mm) | 12.00mm |
| Length of Cut (Decimal Inch) | 1.024" |
| Length of Cut (mm) | 26.00mm |
| Overall Length (Decimal Inch) | 3.268" |
| Overall Length (mm) | 83.00mm |
| Shank Length (Decimal Inch) | 2.246" |
| Shank Length (mm) | 57.05mm |
| Shank Diameter Tolerance | h6 |
| Flute Type | Spiral |
| Number of Flutes | 4 |
| Center Cutting | Yes |
| Chip Breaker | No |
| High Performance | Yes |
| Coating | TX (Ti-NAMITE-X) |
| Product Type | Square End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
SGS
Cutting Diameter (Inch):
42/89"
Cutting Diameter (Decimal Inch):
0.4720"
Cutting Diameter (mm):
12.00mm
Shank Diameter (Inch):
42/89"
Shank Diameter (Decimal Inch):
0.4720"
Shank Diameter (mm):
12.00mm
Overall Length (Inch):
3-26/97"
Overall Length (Decimal Inch):
3.2680"
Overall Length (mm):
83.00mm
Length of Cut (Inch):
1-2/83"
Length of Cut (Decimal Inch):
1.0240"
Length of Cut (mm):
26.00mm
Finish/Coating:
TX (Ti-NAMITE-X)
Number of Flute:
4
interval quantity:
1
