714.897.1700
Chat
Email
Quotes
Quick Order
Youre going to want to get your hands on The 3833 AlumaMill G3 end mill! It annihilates competitors tools when roughing and finishing aluminum and other non-ferrous materials. Its flute shape and relief form generate superior wall finishes, while its unique wiper geometry produces excellent floor finishes. The 3833 AlumaMill G3 is a high-performance end mill with 3-flutes and is stocked uncoated and with FC-5 coating, which helps reduce edge build-up.
| Manufacturer Part Number | 27908 |
| Cutting Diameter (Inch) | 1" |
| Cutting Diameter (Decimal Inch) | 1.000" |
| Cutting Diameter (mm) | 25.40mm |
| Shank Diameter (Inch) | 1" |
| Shank Diameter (Decimal Inch) | 1.000" |
| Shank Diameter (mm) | 25.40mm |
| Cutting Flute Length (Inch) | 3-1/4" |
| Cutting Flute Length (Decimal Inch) | 3.250" |
| Cutting Flute Length (mm) | 82.55mm |
| Radius (Decimal Inch) | 0.030" |
| Overall Length (Inch) | 6" |
| Overall Length (Decimal Inch) | 6.000" |
| Overall Length (mm) | 152.40mm |
| Number of Flutes | 3 |
| Helix Angle (Degree) | 37.50 Degree |
| Length | Extra-Long |
| Flute Spiral | Right Hand |
| Cutting Direction | Right Hand |
| End Type | Corner Radius |
| Coating | FC5 |
| Series | 3833 |
| Product Type | Corner Radius End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Related Products
Fullerton Tool
Fullerton Tool 38701 | 1" Diameter x 1" Shank x 4" OAL x 0.030" Radius 3 Flute FC5 Coated Corner Radius End Mill
Fullerton Tool
Fullerton Tool 27888 | 1" Diameter x 1" Shank x 4" OAL x 0.030" Radius 3 Flute FC5 Coated Corner Radius End Mill
Fullerton Tool
Fullerton Tool 38699 | 1" Diameter x 1" Shank x 4" OAL x 0.030" Radius 3 Flute FC5 Coated Corner Radius End Mill
Fullerton Tool
