714.897.1700
Chat
Email
Quotes
Quick Order
It's designed for use in titanium, super alloys, hardened steels, stainless steels, steels, cast iron, brass & copper, and low si aluminum, it offers a variety of configurations, and is available with single-end and double-end designs. The 3200 4-Flute General Purpose end mill has 4-flutes and is stocked uncoated and with TiAlN coatings.
Product Specifications
| Manufacturer Part Number | 30104 |
| Cutting Diameter (Inch) | 1" |
| Cutting Diameter (Decimal Inch) | 1.000" |
| Cutting Diameter (mm) | 25.40mm |
| Shank Diameter (Inch) | 1" |
| Shank Diameter (Decimal Inch) | 1.000" |
| Shank Diameter (mm) | 25.40mm |
| Cutting Flute Length (Inch) | 2" |
| Cutting Flute Length (Decimal Inch) | 2.000" |
| Cutting Flute Length (mm) | 50.80mm |
| Overall Length (Inch) | 4-1/2" |
| Overall Length (Decimal Inch) | 4.500" |
| Overall Length (mm) | 114.30mm |
| Number of Flutes | 4 |
| Helix Angle (Degree) | 30.00 Degree |
| Length | Extra-Long |
| Flute Spiral | Right Hand |
| Cutting Direction | Right Hand |
| End Type | Ball |
| Coating | TiAlN |
| Series | 3200 |
| Product Type | Ball End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Related Products
Fullerton Tool
Fullerton Tool 30791 | 1" Diameter x 1" Shank x 4" OAL 2 Flute TiAlN Coated Ball End Mill
$253.35
Fullerton Tool
Fullerton Tool 32880 | 1" Diameter x 1" Shank x 4" OAL 4 Flute TiAlN Coated Ball End Mill
$287.60
Fullerton Tool
Fullerton Tool 30106 | 1" Diameter x 1" Shank x 6" OAL 4 Flute TiAlN Coated Ball End Mill
$462.65
Brand:
Fullerton Tool
Mill Diameter (Decimal Inch):
1.0000"
Mill Diameter (Inch):
1"
Mill Diameter (mm):
25.40mm
Shank Diameter (Inch):
1"
Shank Diameter (Decimal Inch):
1.0000"
Shank Diameter (mm):
25.40mm
Overall Length (Inch):
4-1/2"
Overall Length (Decimal Inch):
4.5000"
Overall Length (mm):
114.30mm
Number of Flutes:
4
Helix Angle:
30.00 Degree
Cutting Direction:
Right Hand
Finish/Coating:
TiAlN
interval quantity:
1