714.897.1700
Chat
Email
Quotes
Quick Order
It's designed for use in titanium, super alloys, stainless steels, steels, cast iron, brass & copper, high si aluminum, and low si aluminum and it offers a variety of configurations. The 3300 3-Flute General Purpose end mill has 3-flutes and is stocked uncoated and with TiAlN coatings. Get started with The 3-Flute General Purpose end mill today!
Product Specifications
| Manufacturer Part Number | 30194 |
| Cutting Diameter (Inch) | 3/4" |
| Cutting Diameter (Decimal Inch) | 0.750" |
| Cutting Diameter (mm) | 19.05mm |
| Shank Diameter (Inch) | 3/4" |
| Shank Diameter (Decimal Inch) | 0.750" |
| Shank Diameter (mm) | 19.05mm |
| Cutting Flute Length (Inch) | 2-1/2" |
| Cutting Flute Length (Decimal Inch) | 2.500 |
| Cutting Flute Length (mm) | 63.50mm |
| Overall Length (Inch) | 5" |
| Overall Length (Decimal Inch) | 5.000" |
| Overall Length (mm) | 127.00mm |
| Number of Flutes | 3 |
| Helix Angle (Degree) | 30.00 Degree |
| Length | Extra-Long |
| Flute Spiral | Right Hand |
| Cutting Direction | Right Hand |
| End Type | Square |
| Coating | TiAlN |
| Series | 3300 |
| Product Type | Square End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Related Products
Fullerton Tool
Fullerton Tool 36491 | 3/4" Diameter x 3/4" Shank x 3" OAL 5 Flute FC21 Coated Square End Mill
$223.64
$219.17
Brand:
Fullerton Tool
Mill Diameter (Decimal Inch):
0.7500"
Mill Diameter (Inch):
3/4"
Mill Diameter (mm):
19.05mm
Shank Diameter (Inch):
3/4"
Shank Diameter (Decimal Inch):
0.7500"
Shank Diameter (mm):
19.05mm
Overall Length (Inch):
5"
Overall Length (Decimal Inch):
5.0000"
Overall Length (mm):
127.00mm
Number of Flutes:
3
Helix Angle:
30.00 Degree
Cutting Direction:
Right Hand
Finish/Coating:
TiAlN
interval quantity:
1