714.897.1700
Chat
Email
Quotes
Quick Order
It's designed for use in titanium, super alloys, hardened steels, stainless steels, steels, cast iron, brass & copper, and low si aluminum, it offers a variety of configurations, and is available with single-end and double-end designs. The 3200 4-Flute General Purpose end mill has 4-flutes and is stocked uncoated and with FC-20 coatings.
Product Specifications
| Manufacturer Part Number | 33507 |
| Cutting Diameter (Inch) | 1/8" |
| Cutting Diameter (Decimal Inch) | 0.125" |
| Cutting Diameter (mm) | 3.18mm |
| Shank Diameter (Inch) | 1/8" |
| Shank Diameter (Decimal Inch) | 0.125" |
| Shank Diameter (mm) | 3.18mm |
| Cutting Flute Length (Inch) | 1/2" |
| Cutting Flute Length (Decimal Inch) | 0.500 |
| Cutting Flute Length (mm) | 12.70mm |
| Overall Length (Inch) | 1-1/2" |
| Overall Length (Decimal Inch) | 1.500" |
| Overall Length (mm) | 38.10mm |
| Number of Flutes | 4 |
| Helix Angle (Degree) | 30.00 Degree |
| Length | Standard |
| Flute Spiral | Right Hand |
| Cutting Direction | Right Hand |
| End Type | Square |
| Coating | FC20 |
| Series | 3200 |
| Product Type | Square End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Related Products
Fullerton Tool
Fullerton Tool 35928 | 1/8" Diameter x 1/8" Shank x 1-1/2" OAL 4 Flute FC20 Coated Square End Mill
$20.30
$19.89
Fullerton Tool
Fullerton Tool 35927 | 1/8" Diameter x 1/8" Shank x 1-1/2" OAL 4 Flute FC20 Coated Square End Mill
$20.30
$19.89
Fullerton Tool
Fullerton Tool 35912 | 1/16" Diameter x 1/8" Shank x 1-1/2" OAL 4 Flute FC20 Coated Square End Mill
$19.16
$18.78
Fullerton Tool
Fullerton Tool 35911 | 1/16" Diameter x 1/8" Shank x 1-1/2" OAL 4 Flute FC20 Coated Square End Mill
$19.16
$18.78
Fullerton Tool
Fullerton Tool 35901 | 1/64" Diameter x 1/8" Shank x 1-1/2" OAL 4 Flute FC20 Coated Square End Mill
$24.51
$24.02
Brand:
Fullerton Tool
Mill Diameter (Decimal Inch):
0.1250"
Mill Diameter (Inch):
1/8"
Mill Diameter (mm):
3.18mm
Shank Diameter (Inch):
1/8"
Shank Diameter (Decimal Inch):
0.1250"
Shank Diameter (mm):
3.18mm
Overall Length (Inch):
1-1/2"
Overall Length (Decimal Inch):
1.5000"
Overall Length (mm):
38.10mm
Number of Flutes:
4
Helix Angle:
30.00 Degree
Cutting Direction:
Right Hand
Finish/Coating:
FC20
interval quantity:
1