714.897.1700
Chat
Email
Quotes
Quick Order
It's designed for use in titanium, super alloys, stainless steels, steels, cast iron, brass & copper, and low si aluminum, it offers a variety of configurations, and is available with single-end and double-end designs. The 3215 2-Flute General Purpose end mill has 2-flutes and is stocked uncoated and with TiN coatings.
Product Specifications
| Manufacturer Part Number | 30539 |
| Cutting Diameter (Inch) | 13/64" |
| Cutting Diameter (Decimal Inch) | 0.203" |
| Cutting Diameter (mm) | 5.16mm |
| Shank Diameter (Inch) | 1/4" |
| Shank Diameter (Decimal Inch) | 0.250" |
| Shank Diameter (mm) | 6.35mm |
| Cutting Flute Length (Inch) | 5/8" |
| Cutting Flute Length (Decimal Inch) | 0.625" |
| Cutting Flute Length (mm) | 15.88mm |
| Overall Length (Inch) | 2-1/2" |
| Overall Length (Decimal Inch) | 2.500" |
| Overall Length (mm) | 63.50mm |
| Number of Flutes | 2 |
| Helix Angle (Degree) | 30.00 Degree |
| Length | Standard |
| Flute Spiral | Right Hand |
| Cutting Direction | Right Hand |
| End Type | Ball |
| Coating | TiN |
| Series | 3215 |
| Product Type | Ball End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Related Products
Fullerton Tool
Fullerton Tool 32658 | 13/64" Diameter x 1/4" Shank x 2-1/2" OAL 2 Flute Ball End Mill
$26.66
Brand:
Fullerton Tool
Mill Diameter (Decimal Inch):
0.2030"
Mill Diameter (Inch):
13/64"
Mill Diameter (mm):
5.16mm
Shank Diameter (Inch):
1/4"
Shank Diameter (Decimal Inch):
0.2500"
Shank Diameter (mm):
6.35mm
Overall Length (Inch):
2-1/2"
Overall Length (Decimal Inch):
2.5000"
Overall Length (mm):
63.50mm
Number of Flutes:
2
Helix Angle:
30.00 Degree
Cutting Direction:
Right Hand
Finish/Coating:
TiN
interval quantity:
1